Skip to content
Home / Knowledge / Engineering / ISO 8062 Dimensional Casting Tolerances (CT8 to CT12) & Required Machining Allowances (RMA Grade F/G) Guide
On this pageARCHITECTURAL DASHBOARD & METADATA (`ENG-002`)

ISO 8062 Dimensional Casting Tolerances (CT8 to CT12) & Required Machining Allowances (RMA Grade F/G) Guide

1 min read Engineering ENG-002

Prerequisite: The Ultimate Engineering & Sourcing Guide to Industrial Metal Castings: Grey Iron, Ductile Iron, & Steel Castings Handbook

ARCHITECTURAL DASHBOARD & METADATA (ENG-002)

Previous: Geometric Dimensioning & Tolerancing (GD&T) for Castings & Forgings: Datum Reference Frames A-B-C

Request Industrial RFQ

Related guides

The Ultimate Engineering & Sourcing Guide to Industrial Metal Castings: Grey Iron, Ductile Iron, & Steel Castings Handbook

Exhaustive engineering & sourcing guide to industrial metal castings. Compare EN-GJL grey iron, EN-GJS ductile iron & steel. Master PPAP, tolerances & TCO.

Design for Manufacturability (DFM) of Metal Castings: Wall Thickness, Fillets, Ribs & Draft Angles

Resin-Bonded Furan Sand Casting Process: Precision, Dimensional Tolerances & Surface Finish Specs