Approved Manufacturing Partner
Aquagroup × STÅLFE
Aquagroup foundries supply cast, forged and machined industrial components across automotive, commercial vehicles, e-mobility, rail, wind, power, municipal infrastructure and heavy industry. StålFe is the European commercial and technical interface from RFQ to delivery.
Casting and forging applications across industries within Aquagroup foundry capacity, materials and process capability.
Named part families from Aquagroup production programmes—cast then machined for OEM fit. Illustrative imagery; actual geometry follows your drawing.
Cast-and-machined turbocharger support bracket for heavy-duty engine packages.
Locates and stiffens the turbocharger relative to the engine block, carrying vibration and thermal loads. Produced as a casting then finish-machined on mounting faces and bores for OEM fit.
Precision turbocharger console (Turbolader Konsole) for T6 engine families.
German OEM-style turbo console that bridges charger and block. Variants include J624 and J624 A136R-A52 with machined datums for alignment and sealing.
Cast turbocharger console for A238 application packages.
Provides a rigid mount path for the charger assembly and related pipework interfaces on specified engine builds.
Machined gear housing casting for T6 driveline modules.
Encloses gears and bearings; machined bores and faces keep centre distances and seal lands within drawing tolerance.
Collective / collector casing for T6 turbo and exhaust architecture.
Gathers gas or oil flows in a compact cast body; machining prepares flanges and ports for leak-tight joints.
Turbo wheel / compressor-side casing castings with machined interfaces.
Forms the aerodynamic envelope around the wheel; critical diameters and flanges are machined after casting.
Machined intake manifold for T4 B configurations.
Distributes charge air to cylinders; casting complexity handles runners while machining ensures gasket faces and port alignment.
Cast intake connecting pipe for T3 packages.
Routes charge air between cooler, turbo and manifold; machined ends support clamps or flanges.
Y-piece exhaust casting for A238 / J420 exhaust architecture.
Merges exhaust streams with controlled geometry; machining prepares connection faces for downstream pipework.
Cast exhaust bend for routing hot gas around packaging constraints.
Replaces fabricated elbows where durability and repeatable flow path matter; can be supplied as-cast or machined.
Machined exhaust elbow for T4 / A140 AGK programmes.
Turns exhaust flow at the turbo or manifold interface; machined flanges maintain seal under thermal cycling.
T-piece exhaust casting with machined ports.
Splits or joins exhaust branches; machining ensures concentric ports and flat gasket lands.
Structural bracket supporting exhaust pipework.
Isolates vibration and holds pipe geometry under heat; typically cast iron with machined mount holes.
Exhaust connecting pipe between turbo and downstream system on T3 builds.
Cast passage with machined ends for reliable sealing in high-temperature exhaust duty.
Cast exhaust pipeline / Abgas line components.
Forms part of the exhaust gas path where a cast geometry is preferred over welded tube for durability.
Machined adapter flange for T4 turbo and manifold interfaces.
Transitions between mismatched bolt patterns or port sizes; precision machining is essential for leak-free joints.
Cast bearing bracket for shaft support.
Holds bearing seats in alignment; machined bores control concentricity and preload conditions.
Loose / floating bearing bracket for T6L layouts.
Allows controlled alignment of bearing axes under thermal growth; supplied machined to drawing.
Bracket for generator mounting on engine packages.
Transfers generator mass and torque into the block or frame; cast structure with machined pads.
Grey iron (GG) holder / fixture casting to size envelope.
Custom holder geometry for mounting accessories; GG iron offers damping and machinability.
Housing for oil level sensing or sight interfaces.
Protects sensors and seals oil circuits; machined faces ensure gasket integrity.
Cast cover lid for housings and casings.
Closes maintenance openings while maintaining stiffness and sealing; often machined on the flange.
Bell housing casting for driveline coupling.
Connects engine to gearbox or PTO with accurate pilot diameters machined after casting.
General case / casing casting (M series).
Envelope casting for mechanical modules; finish machining adapts to specific drawing revisions.
Cover for damper housing assemblies.
Protects torsional damper hardware and provides sealed closure with machined contact faces.
Lid casting for mixture / charge cooler modules.
Closes the cooler housing while allowing service access; machining ensures flatness for seals.
Bearing housing for rocker arm trains.
Supports rocker shafts with machined bearing seats critical to valve timing and wear life.
Cast or forged rocker arm for valve actuation.
Transfers cam motion to valves; geometry and material grade are set for fatigue and wear.
Cast oil pipe / gallery components.
Routes lubricating oil through compact cast passages where tube assemblies are impractical.
General intake or exhaust manifold casting.
Multi-port cast manifold for gas distribution; machining prepares flanges and sensor bosses.
High-volume grey iron housings and structural castings for pumps, automotive and general engineering on automated green sand / DISA lines.
SG iron components for higher strength and toughness requirements across automotive, hydraulics and industrial machinery.
Pressure-duty hydraulic castings with machining, leak testing and documentation pathways suited to European OEMs.
Iron castings for railway and heavy industrial programmes with partner quality systems and inspection support.
Carbon, alloy and stainless steel castings from the partner steel cell for higher-integrity industrial parts.
Closer-tolerance shell mould castings where surface detail and dimensional control reduce machining stock.
Copper-alloy castings including brass, bronze and nickel aluminium bronze for marine, pump and corrosive-service applications.
Cast-and-machine programmes on captive CNC (HMC/VMC/turning/VTL) with CMM verification.
Leak testing, Millipore, assembly, painting and ED coating for ready-to-fit industrial components.