Odlewy z żeliwa szarego (EN-GJL / DIN GG / ASTM A48): kompletny podręcznik metalurgii, obróbki i zaopatrzenia
SZYBKA ODPOWIEDŹ I PRZEGLĄD METALURGICZNY
TECHNICAL FUNDAMENTALS & ENGINEERING SPECIFICATION MATRIX The operational capacity and fatigue life of components inside the Grey Iron Odlewy category depend upon strict adherence to international material and dimensional standards (
ISO, EN, DIN, ASTM). Below is the master specification matrix.GLOBAL SOURCING ECONOMICS & INDIAN FACTUAL BENCHMARKS (
AQUASUB / TEXMO) Factual benchmark: High-precision grey iron machine tool bases and pump volutes cast via automated green sand lines in the Coimbatore Foundry Corridor (Aquasub / Texmo). When evaluating international sourcing options for Grey Iron Odlewy, European procurement directors can reference established Indian manufacturing leaders in the Coimbatore Corridor (Aquasub Engineering / Aquagroup and Texmo Industries). Operating captive automated green sand molding loops (DISAMATIC 2110) coupled with multi-axis CNC horizontal machining and 100% automated pressure testing, these groups prove definitively that Indian foundries routinely deliver European zero-defect (PPM < 10) standards at a 30%+ net landed DDP savings (PIL-008 / PRO-004).
[EXECUTIVE QUICK ANSWER: GREY IRON CASTINGS] Grey Cast Iron (EN-GJL under EN 1561 / ASTM A48) contains 2.8% to 3.8% carbon precipitated as interconnected graphite flakes. While these flakes yield low elongation (<0.8%), they provide an extraordinary specific vibration damping capacity—approx. 10x higher than carbon steel and 3-5x higher than ductile iron—making EN-GJL-250 the undisputed engineering choice for machine tool beds, CNC milling bases, pump housings, and automotive brake discs.
| Klasa standardowa (EN 1561) | Odpowiednik DIN/ASTM A48 | Wytrzymałość na rozciąganie Rm (MPa min) | Typowa twardość (HBW) | Podstawowe zastosowania przemysłowe |
|---|---|---|---|---|
| EN-GJL-150 | DIN GG15 / ASTM A48 klasa 20 | 150 | 150 – 190 HBW | Lekkie osłony, wsporniki bezciśnieniowe, przeciwwagi. |
| EN-GJL-200 | DIN GG20 / ASTM A48 klasa 30 | 200 | 170 – 210 HBW | Standardowe obudowy przekładni, zawory niskociśnieniowe, obudowy kół pasowych rolniczych. |
| EN-GJL-250 | DIN GG25 / ASTM A48 klasa 35 | 250 | 180 – 240 HBW | Ciężkie łoża obrabiarek CNC, obudowy pomp (punkt odniesienia Aquasub), tarcze hamulcowe, bloki silnika. |
| EN-GJL-300 | DIN GG30 / ASTM A48 klasa 45 | 300 | 210 – 260 HBW | Wysokoobciążone bloki cylindrów hydraulicznych, skrzynie biegów do dużych obciążeń, kolektory ciśnieniowe. |