Godkänd tillverkningspartner

Product & application portfolio

← Tillbaka till Aquagroup översikten

Partnergjuteriets produktion stöder pump-, fordons-, hydraulik- och järnvägskomponenter - vanligtvis som gjutna och bearbetade industridelar. Utforska STÅLFE inköpsportföljen för illustrativa produktfamiljer.

Expanded casting & forging product portfolio

Högvolymshus av gråjärn och konstruktionsgjutgods för pumpar, fordon och allmän teknik på automatiserade grönsand-/DISA-linjer.

Discuss a project STÅLFE sourcing families

Industry sectors

Tryckkraftiga hydrauliska gjutgods med bearbetning, läckagetestning och dokumentationsvägar anpassade för europeiska OEM-tillverkare.

Automotive & passenger vehicles — illustrative

Automotive & passenger vehicles

  • Forged steering knuckle & suspension forged
    High-strength knuckles, kingpins and suspension arms for cars and light vehicles.
  • Cast engine block & transmission housing cast
    Complex iron or aluminium housings with internal passages for engines and drivetrains.
  • Cast exhaust & intake manifolds cast
    Multi-port manifolds for charge and exhaust gas routing; machined flanges for sealing.
  • Cast turbocharger housings cast
    Compressor and turbine housings for passenger and light-duty turbo packages.
  • Cast differential & axle carriers cast
    Structural carriers that locate gears and bearings in the driveline.
  • Forged connecting rods & crankshaft blanks forged
    Fatigue-critical engine forgings supplied to drawing and heat-treat condition.
  • Cast brake caliper & disc hubs cast
    Safety-related brake castings for OEM and spare-parts programmes.
  • Forged wheel hubs & flanges forged
    Hub and flange forgings for wheel-end duty with machined bearing seats.
  • Cast water-pump & oil-pump housings cast
    Fluid-handling housings for engine cooling and lubrication circuits.
  • Forged pitman & idler arms forged
    Steering linkage forgings for passenger and light commercial platforms.
Commercial vehicles, trucks & trailers — illustrative

Commercial vehicles, trucks & trailers

  • Cast axle housings & differential carriers cast
    Heavy CV axle and carrier castings for trucks, buses and trailers.
  • Cast brake drums & discs cast
    High-thermal-mass brake castings for HCV and trailer duty.
  • Forged steering knuckles & kingpins forged
    Fatigue-resistant forged steering parts for heavy axle loads.
  • Cast fifth-wheel & chassis brackets cast
    Structural brackets and mounts for tractor-trailer interfaces.
  • Forged spring hangers & shackles forged
    Suspension forgings for leaf-spring and air-suspension packs.
  • Cast flywheel housings & bell housings cast
    Driveline housings that couple engines to gearboxes and PTOs.
E-mobility & EV drivetrains — illustrative

E-mobility & EV drivetrains

  • Cast e-motor housings cast
    Aluminium or iron housings for traction motors with machined bearing seats.
  • Cast inverter & gearbox housings cast
    Power-electronics and reduction-gear envelopes for BEV/HEV packages.
  • Cast structural battery brackets cast
    Mounting and stiffening castings for battery trays and underbody modules.
  • Forged drive flanges & shafts forged
    High-integrity forged interfaces for e-axle and reducer programmes.
Aerospace & space — illustrative

Aerospace & space

  • Forged wing spar & structural mounts forged
    Structural spars, brackets and mounts where strength-to-weight and fatigue life matter.
  • Forged jet engine disk forged
    High-integrity alloy disks and shafts for demanding thermal and pressure duty.
  • Investment-cast turbine blade investment-cast
    Precision blades and nozzles with fine aerodynamic detail in heat-resistant alloys.
  • Cast satellite component cast
    Structural brackets, thruster housings and antenna mounts for spacecraft hardware.
Defence & security — illustrative

Defence & security

  • Structural brackets & driveline castings cast
    Vehicle and equipment structures to drawing for defence programmes.
  • Forged mounts & coupling parts forged
    High-integrity forgings where impact and fatigue margins matter.
Rail & rolling stock — illustrative

Rail & rolling stock

  • Cast bogie frames & bolsters cast
    Structural iron castings for heavy rail and metro bogies.
  • Cast brake discs & shoe carriers cast
    Safety-critical brake castings for rolling stock and metro fleets.
  • Cast axleboxes & bearing housings cast
    Axlebox and bearing envelopes machined for journal fit.
  • Cast coupler pockets & draft-gear housings cast
    Coupling interfaces for freight and passenger consists.
  • Forged axles & gears forged
    Fatigue-resistant forged axles, gears and pinions for rail drivetrains.
  • Forged couplers & draft gear forged
    Forged coupling hardware for heavy rail and metro connecting systems.
  • Cast metro door & mechanism housings cast
    Door actuator and mechanism housings for metro and light-rail cars.
  • Forged suspension links & bogie pins forged
    Primary and secondary suspension forgings for dynamic rail loads.
  • Cast track & baseplate components cast
    Baseplates and trackside castings where iron foundry routes apply.
  • Forged locomotive crankshaft & turbo parts forged
    Heavy forged rotating parts for locomotive power packs.
Marine, shipbuilding & offshore — illustrative

Marine, shipbuilding & offshore

  • NAB & bronze seawater parts cast
    Corrosion-resistant copper-alloy castings for pumps, valves and fittings.
  • Forged shafts & rudder stocks forged
    Marine shafting and structural forgings for saltwater duty.
Wind energy — illustrative

Wind energy

  • Cast hub & bedplate programmes cast
    Large ductile-iron hubs and bedplates for onshore and offshore turbines.
  • Forged main shafts & flanges forged
    Heavy forged shafts and flanges for wind drivetrains.
  • Cast bearing housings & nacelle frames cast
    Structural castings that locate main bearings and nacelle modules.
  • Forged yaw & pitch components forged
    Forged rings and links for yaw and pitch actuation systems.
Conventional, hydro & nuclear power — illustrative

Conventional, hydro & nuclear power

  • Cast turbine casings & valve bodies cast
    Stationary and flow-path castings for thermal and hydro plant.
  • Forged shafts & discs forged
    High-integrity rotating forgings for turboalternator duty.
  • Cast pump & valve bodies (power plant) cast
    Pressure-containing castings for feedwater, cooling and process loops.
  • Nuclear-grade valve & pump casings cast
    High-documentation castings for nuclear programmes when specified (qualification to drawing).
Oil, gas & petrochemical — illustrative

Oil, gas & petrochemical

  • Forged valve bodies & flanges forged
    Pressure-retaining forgings for wellhead, pipeline and process service.
  • Cast pump & compressor housings cast
    Robust casings for upstream, midstream and plant rotating equipment.
Compressors & compressed-air equipment — illustrative

Compressors & compressed-air equipment

  • Cast screw & recip compressor housings cast
    Cylinder blocks and housings for industrial air and process compressors.
  • Cast end covers & bearing housings cast
    Machined covers and bearing envelopes for compressor packages.
  • Forged shafts & rotors blanks forged
    Forged blanks for compressor shafts and rotor programmes.
  • Cast refrigeration compressor bodies cast
    Cold-chain and industrial refrigeration compressor casings.
Power transmission & gearboxes — illustrative

Power transmission & gearboxes

  • Cast gearbox housings cast
    Industrial and mobile gearbox envelopes with machined bore centres.
  • Forged gear blanks & flanges forged
    Near-net gear blanks and flanges for drive trains.
  • Cast bearing caps & covers cast
    Caps and covers that close bearing seats and oil galleries.
  • Forged coupling hubs forged
    Drive coupling hubs for industrial power transmission.
Hydraulics & fluid power — illustrative

Hydraulics & fluid power

  • Hydraulic valve bodies & manifolds machined-casting
    Pressure-tight cast and machined bodies for mobile and industrial hydraulics.
  • Cast pump housings & end plates cast
    Hydraulic pump casings and plates for mobile and factory fluid power.
Pumps, valves & fluid equipment — illustrative

Pumps, valves & fluid equipment

  • Pump volutes, impellers & valve bodies cast
    Iron and non-ferrous hydraulic passages for water and process pumping.
  • Forged valve stems & flanges forged
    Pressure-retaining forged trim and flange components for valve OEMs.
Water, wastewater & municipal infrastructure — illustrative

Water, wastewater & municipal infrastructure

  • Cast manhole covers & frames cast
    Ductile and grey iron street castings for municipal networks.
  • Cast waterworks valve & hydrant bodies cast
    Valve and hydrant bodies for potable water and fire networks.
  • Cast pump casings for wastewater cast
    Abrasion-tolerant casings for sewage and stormwater pumping.
  • Fire-protection valve bodies cast
    Valve castings for fire networks (documentation scope to drawing / market approvals).
Construction & heavy equipment — illustrative

Construction & heavy equipment

  • Cast housings & counterweights cast
    Structural and ballast castings for cranes and earthmoving machines.
  • Forged pins, hooks & undercarriage forged
    Wear- and impact-resistant forged links for heavy plant.
  • Cast excavator boom & arm housings cast
    Structural cast housings for excavator and loader architectures.
  • Cast slew-bearing housings cast
    Housings that locate slew bearings on mobile plant.
  • Cast hydraulic valve blocks (mobile) machined-casting
    Mobile hydraulic manifolds for construction equipment.
  • Forged track links & pivot pins forged
    Undercarriage forgings for crawler machines.
  • Forged ripper shanks & hitch parts forged
    Ground-engaging and quick-coupler forgings for earthmoving.
  • Cast track-frame components cast
    Frame and shoe-related castings for crawler undercarriages.
  • Forged shackles & lifting hardware forged
    Lifting and hitch forgings for construction site equipment.
  • Cast concrete-pump & plant housings cast
    Pump and mixer plant castings for construction materials handling.
Mining & minerals — illustrative

Mining & minerals

  • Wear liners & crusher castings cast
    Abrasion-oriented cast parts for mineral processing.
  • Forged drill & adaptor parts forged
    Tough forged tooling interfaces for drilling and excavation.
Agriculture & farm machinery — illustrative

Agriculture & farm machinery

  • Cast tractor housings & cases cast
    Transmission and axle housings for tractors and implements.
  • Forged hitch links & sprockets forged
    Driveline and hitch forgings for field duty.
General engineering & industrial machinery — illustrative

General engineering & industrial machinery

  • Gearbox & compressor frames cast
    Machine bases and housings for continuous industrial plant.
  • Cast machine beds & columns cast
    Structural frames for machine tools and process equipment.
Process & chemical industry — illustrative

Process & chemical industry

  • Alloy pump & valve bodies cast
    Corrosion-oriented castings for chemical service.
Material handling & intralogistics — illustrative

Material handling & intralogistics

  • Gearbox housings & forged hooks cast
    Cast housings and forged lifting hardware for conveyors and cranes.
Building services & HVAC — illustrative

Building services & HVAC

  • Valve & pump bodies cast
    Iron and bronze fittings for building water and HVAC loops.
Medical devices & equipment — illustrative

Medical devices & equipment

  • Cast equipment housings & frames cast
    Structural housings for imaging and laboratory systems (non-implant programmes).
Industrial engines & gensets — illustrative

Industrial engines & gensets

  • Cast engine blocks & cylinder heads cast
    Iron and aluminium blocks and heads for industrial engines and generator sets.
  • Cast flywheel & bell housings cast
    Driveline housings coupling engines to alternators and gearboxes.
  • Forged connecting rods & crank blanks forged
    Fatigue-critical forgings for industrial engine programmes.
  • Cast exhaust manifolds & turbo housings cast
    Heat-resistant manifolds and turbo housings for genset duty cycles.
  • Cast oil pans & coolant housings cast
    Fluid-handling castings for lubrication and cooling circuits.
  • Forged mounting brackets & frames forged
    Structural forgings for skid and genset frame interfaces.
Elevators & lifts — illustrative

Elevators & lifts

  • Cast sheave & traction housings cast
    Structural cast housings for traction machines and sheave assemblies.
  • Forged safety & guide components forged
    High-integrity forged parts for safety gears and guide systems.
  • Cast gearbox & drive housings cast
    Machined cast housings for elevator drive gearboxes.
  • Cast brake drums & caliper bodies cast
    Brake castings for machine-room and MRL elevator systems.
  • Forged shaft & coupling blanks forged
    Shaft and coupling forgings for lift drive trains.
  • Cast counterweight frames & brackets cast
    Structural cast frames and brackets for counterweight assemblies.
Electrical grid & T&D fittings — illustrative

Electrical grid & T&D fittings

  • Cast insulator fittings & caps cast
    Hardware fittings for porcelain and composite insulator strings.
  • Forged line hardware & clevises forged
    Forged clevises, sockets and line fittings for overhead T&D.
  • Cast switchgear & busbar supports cast
    Structural cast supports for indoor and outdoor switchgear.
  • Cast transformer tank accessories cast
    Accessory castings for transformer tanks and cooling circuits.
  • Forged grounding & clamp components forged
    Forged clamps and grounding hardware for grid installations.
  • Cast enclosure & flange frames cast
    Enclosure frames and flange castings for electrical cabinets.
Refrigeration & cold chain — illustrative

Refrigeration & cold chain

  • Cast refrigeration compressor bodies cast
    Compressor casings for industrial and cold-chain refrigeration packages.
  • Cast scroll & screw housings cast
    Precision housings for scroll and screw refrigeration compressors.
  • Cast valve bodies & manifolds cast
    Refrigerant valve bodies and manifolds for plant and rack systems.
  • Forged flanges & pressure fittings forged
    Pressure-rated forgings for refrigeration piping interfaces.
  • Cast heat-exchanger end covers cast
    End covers and headers for evaporators and condensers.
  • Cast motor & fan housings cast
    Housings for condenser fans and drive motors in cold-chain plant.

Engine & turbocharger cast-machined parts

Visa i portföljen STÅLFE

STÅLFE material families

Steel castings

Steel castings

Carbon, alloy and stainless steel castings from the partner steel cell for higher-integrity industrial parts.

Request a Quote