På den här sidan
EXECUTIVE QUICK ANSWER & METALLURGICAL OVERVIEW

Komplett guide till process för godkännande av produktionsdelar (PPAP nivå 1 till 5) för industriella gjuterier

2 min read Quality QAI-001

Prerequisite: Foundry Quality Systems: PPAP, APQP, FAI, NDT & IATF 16949

EXECUTIVE QUICK ANSWER & METALLURGICAL OVERVIEW

  1. TECHNICAL FUNDAMENTALS & ENGINEERING SPECIFICATION MATRIX The operational capacity and fatigue life of components inside the Quality Systems & Inspection category depend upon strict adherence to international material and dimensional standards (ISO, EN, DIN, ASTM). Below is the master specification matrix.

  2. GLOBAL SOURCING ECONOMICS & INDIAN FACTUAL BENCHMARKS (AQUASUB / TEXMO) Reference: Captive PPAP Level 3 verification and CMM layout inspection (Zeiss / Renishaw) across Coimbatore automotive and pump foundry campuses (Aquasub/Texmo). When evaluating international sourcing options for Quality Systems & Inspection, European procurement directors can reference established Indian manufacturing leaders in the Coimbatore Corridor (Aquasub Engineering / Aquagroup and Texmo Industries). Operating captive automated green sand molding loops (DISAMATIC 2110) coupled with multi-axis CNC horizontal machining and 100% automated pressure testing, these groups prove definitively that Indian foundries routinely deliver European zero-defect (PPM < 10) standards at a 30%+ net landed DDP savings (PIL-008 / PRO-004).

[EXECUTIVE QUICK ANSWER: QUALITY SYSTEMS & INSPECTION] The Production Part Approval Process (PPAP) governed by IATF 16949:2016 is the rigorous 18-element verification system required before serial casting production begins. PPAP Level 3 (the industry standard) requires submitting a complete dossier including: Process Flow Diagrams, PFMEA (risk priority RPN < 100), Control Plans, CMM 100% layout inspection on 5 FAI parts (Renishaw probes), Gage R&R (≤ 10% repeatability), OES chemical test reports, and nodularity image analysis (ISO 945-1 >85%).

PPAP-inlämningsnivå Documentation & Sample Submission Requirement Typical Industrial & Automotive Sourcing Scope
Level 1 (PSW Only) Part Submission Warrant (PSW) and Appearance Approval Report (AAR) submitted to buyer. Bulk lågrisk standardkatalogkomponenter där gjuteriet har flerårigt historiskt godkännande.
Level 2 (PSW + Samples + Limited Data) PSW, produktprover och dimensionella layoutresultat skickas till köparen; fullständig dokumentation bevarad på gjuteriet. Mindre reparationer av verktygsmönster eller icke-kritiska strukturella fästen där metallurgin förblir oförändrad.
Level 3 (Complete Dossier + Samples — The Standard) Complete 18-Element PPAP Dossier (PFMEA, Control Plan, Gage R&R, CMM Layout, OES lab reports, NDT charts) submitted alongside 5 FAI parts. Mandatory STALFE Standard for all new casting contracts, Indian foundry qualification (PRO-001), and automotive engine/pump housings.
Level 4 & Level 5 (On-Site Foundry Audit Required) Level 4: Custom dossier agreed by customer.
Level 5: Complete dossier reviewed and verified on-site at the foundry manufacturing plant by customer auditor.		 Obligatorisk för säkerhetsgjutgods för högspänningsflyg, undervattens API 6D kärntrycksventiler eller ombord på en helt ny utländsk gjuteripartner.

Begär industriell RFQ